 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEN 30WIN Series, 30 Watt Features Smallest encapsulated 30 W converter 2" x 1" x 0.4" shielded metal package Ultra wide 4:1 input voltage range Single- dual- and triple output models Very high efficiency up to 91% Operating temp. range -40 C to +75 C I/O isolation 1500 VDC Over temperature and short circuit protection pending Remote On/Off Adjustable output voltage 3-year product warranty The TEN 30WIN series is a family of high performance 30W dc-dc converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code TEN 30-2407WIN TEN 30-2409WIN TEN 30-2410WIN TEN 30-2411WIN TEN 30-2412WIN TEN 30-2413WIN TEN 30-2421WIN TEN 30-2422WIN TEN 30-2423WIN TEN 30-2433WIN TEN 30-2434WIN TEN 30-2431WIN TEN 30-2432WIN TEN 30-4807WIN TEN 30-4809WIN TEN 30-4810WIN TEN 30-4811WIN TEN 30-4812WIN TEN 30-4813WIN TEN 30-4821WIN TEN 30-4822WIN TEN 30-4823WIN TEN 30-4833WIN TEN 30-4834WIN TEN 30-4831WIN TEN 30-4832WIN Input voltage range Output 1 1.5 VDC / 8.5 A 2.5 VDC / 8.0 A 3.3 VDC / 7.5 A 5.1 VDC / 6.0 A 12 VDC / 2.5 A 15 VDC / 2.0 A + 5 VDC / 3.0 A +12 VDC / 1.25 A +15 VDC / 1.0 A 3.3 VDC / 5.0 A 3.3 VDC / 5.0 A 5 VDC / 4.0 A 5 VDC / 4.0 A 1.5 VDC / 8.5 A 2.5 VDC / 8.0 A 3.3 VDC / 7.5 A 5.1 VDC / 6.0 A 12 VDC / 2.5 A 15 VDC / 2.0 A + 5 VDC / 3.0 A +12 VDC / 1.25 A +15 VDC / 1.0 A 3.3 VDC / 5.0 A 3.3 VDC / 5.0 A 5 VDC / 4.0 A 5 VDC / 4.0 A Output 2 Output 3 Efficiency typ. 80 % 83 % 86 % 88 % 89 % 89 % 88 % 87 % 87 % 86 % 86 % 88 % 88 % 80 % 84 % 86 % 88 % 90 % 91 % 88 % 88 % 88 % 86 % 86 % 88 % 88 % Page 1 of 4 9 - 36 VDC (24 VDC nominal) -5 VDC / 3.0 A -12 VDC / 1.25 A -15 VDC / 1.0 A +12 VDC / 0.42 A +15 VDC / 0.33 A +12 VDC / 0.42 A +15 VDC / 0.33 A -12 VDC / 0.42 A -15 VDC / 0.33 A -12 VDC / 0.42 A -15 VDC / 0.33 A 18 - 75 VDC (48 VDC nominal) -5 VDC / 3.0 A -12 VDC / 1.25 A -15 VDC / 1.0 A +12 VDC / 0.42 A +15 VDC / 0.33 A +12 VDC / 0.42 A +15 VDC / 0.33 A -12 VDC / 0.42 A -15 VDC / 0.33 A -12 VDC / 0.42 A -15 VDC / 0.33 A http://www.tracopower.com DC/DC Converters TEN 30WIN Input Specifications Input current at no load (nominal input) 12 & 15 VDC / 12 & 15 VDC models, 24 other models, 24 12 & 15 V models, 48 other models, 48 1.5 VDC model, 24 2.5 VDC model, 24 3.3 VDC model, 24 other models, 24 1.5 VDC model, 48 2.5. VDC model, 48 3.3 VDC model, 48 other models, 48 V: V: V: V: V: V: V: V: V: V: V: V: 30 mA typ. 100 mA typ. 15 mA typ. 55 mA typ. 700 mA typ. 1050 mA typ. 1250 mA typ. 1500 mA typ. 350 mA typ. 520 mA typ. 630 mA typ. 750 mA typ.) 30 Watt Input current at full load (nominal input) Start-up voltage / under voltage lockout Surge voltage (100 msec. max.) Conducted noise (input) 24 V models: 9 VDC / 8 VDC (typ.) 48 V models: 18 VDC / 16 VDC (typ.) 24 V models: 50 VDC max. 48 V models: 100 VDC max EN 55022 class A with input capacitor 24 V models: 4.7 F / 50 V 1812 MLCC 48 V models: 2.2 F / 100 V 1812 MLCC) 1 % (5 % for auxilary outputs) 10 % with external resistor (see page 3) 0.2 % max. 1 % / 5 % max. (main / auxilary) 0.5 % max. (0 - 100 %) 1 % max. (0 - 100 %) 5 % max. (25 / 100 %) 1 % max. / 5 % max. (10 - 100 %) Output Specifications Voltage set accuracy Output voltage adjustment (only for single output models) Regulation - Input variation single- and dual output models: triple output models: - Load variation single output models: dual output models balanced load: dual output models unbalanced load: triple output models (main/auxiliary): Minimum load single- and dual output models: not required triple output models: 10% of rated max current (operation at lower load condition will not damage the converters. However, they may not meet all listed specifications) 0.02 %/K max. 1.5 V - 5.1 VDC models: 100 mVpk-pk. typ. triple output models: 50 / 75 mVpk-pk typ. (main / auxilary) other models: 150 mVpk-pk typ. 30 ms typ. 250 s typ. indefinite (automatic recovery) 150% of Iout max. typ. @ 115 C typ. 1.5 2.5 3.3 5.1 12 15 VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 2.0 V 3.3 V 3.9 V 6.2 V 15 V 18 V 20'000 F max. 14'000 F max. 2'000 F max. 3'000 F max. 1'300 F max. 15'000 / 220 F max. (main / auxilary) 8'000 / 220 F max. (main / auxilary) Temperature coefficient Ripple and noise (20 MHz Bandwidth) Start up time (nominal Vin and constant resistive load) Transient response time (25% load change) Short circuit protection Over load protection Thermal shutdown Over voltage protection Capacitive load output models 1.5 - 3.3 VDC models: 5.1 VDC models: 12 & 15 VDC models: 5 VDC models: other dual output models: 3.3 VDC triple output models: 5.1 VDC triple output models: All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 30WIN General Specifications Temperature ranges - Operating - Case temperature - Storage -40 C to +75 C +105 C max. -55 C to +125 C 3.5 %/K above 60 C 95 % rel. H max. - Natural convection - Natural convection with heat sink 12 C/W 10 C/W 30 Watt Derating Humidity (non condensing) Thermal inpedance Reliability, calculated MTBF (MIL-HDBK-217F, @ 25C, ground benign) Isolation voltage (60 sec) Isolation resistance Isolation capacity Remote On/Off - Input / Output - Input / Output - Input / Output - On: - Off: - Off idle current: single- and dual output models: 435'000 h triple output models: 320'000 h 1500 VDC >1000 M Ohm 1500 pF max. 3.0 to 12 VDC or open circuit. 0 to 1.2 VDC or short circuit pin 3 and pin 2 3 mA max. Switching frequency (pulse width modulation PWM) single- and dual output models: 430 kHz typ. triple output models: 400 kHz typ. Vibration and thermal shock Safety standards Safety approvals MIL-STD-810E UL 60950-1, EN 60950-1, IEC 60950-1 UL /cUL file pending Output Voltage Adjustment (for single output models only) Trim up Trim Trim down +Vout Ru - Vout Nominal output voltage at open Trim input! Ru [kohm] output +5% +10% 1.5 2.5 0.56 4.3 0.051 0.33 3.3V 6.8 0.75 5.1V 5.1 0.75 12V 43 4.3 15V 47 1.8 Rd [kohm] output -5% -10% 1.5 2.5 0.68 6.2 0.062 0.75 3.3V 8.2 0.62 Trim Rd 5.1V 6.2 0.82 12V 56 5.6 15V 56 2.2 Physical Specifications Case material Baseplate material Potting material Weight Soldering temperature copper, nickel plated none conductive FR4 epoxy (UL 94V-0 -rated) 31 g (1.1 oz) max. 265 C / 10 sec. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 30WIN Outline Dimensions Single- and dual output models 15.24 (0.6) 30 Watt Triple output models 12.7 (0.5) 5.08 (0.2) 5.08 2.54 (0.1) Pin-Out 7.62 (0.3) (0.2) Pin 1 2 3 4 5 6 Single +Vin (Vcc) -Vin (GND) Remote On/Off Output 1 Common Trim No pin Dual +Vin (Vcc) -Vin (GND) Remote On/Off Output 1 Common Output 2 No pin Triple +Vin (Vcc) -Vin (GND) Remote On/Off Output 2 Output 3 Common Output 1 3 45.72 (1.8) 50.8 (2.0) 21 3 21 Bottom View Bottom View 2.5 (0.1) 6 (0.22) 5 10.16 (0.4) 4 7 6 54 5.08 (0.2) 7 5.6 10.2 (0.4) 20.32 (0.8) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.04 0.002) Pin pitch tolerances: 0.35 (0.014) Case tolerances: 0.5 (0.02) Heat-Sink (Option) Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17g (0.60oz) without converter Thermal impedance after assembling: 10 K/W Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 16.8 (0.66) max. Specifications can be changed any time without notice. Rev. 07/08.1 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 14.5 (0.57) Page 4 of 4 |
Price & Availability of TEN30-2421WIN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |